PORTABLE BATTERY SPOT WELDER 500A YT-82507 YATO

Portable spot welder with powerbank function for permanently bonding 18650 and similar cells using nickel and nickel strip. LCD display with simple, intuitive menus. Ten power levels. Two lithium-polymer cells connected in parallel with a maximum instantaneous discharge current of up to 90 C. 40 cm silicone-insulated copper wires of approximately 10mm2 with replaceable copper terminations.

The device gives a maximum welding current of ~500 A. This is the average real current value measured over a 100 ms period. Some manufacturers quote the current parameters of the mosfets or the peak current value instead of the real welding current. From a technical data point of view, this is true, but in practice it often becomes impossible to achieve a proper weld with 0.15 mm nickel-plated tape. YATO's portable spot-welding machine makes it possible to carry out correct welds using 8 mm wide, 0.20 mm thick nickel-plated tape and 8 mm wide, 0.15 mm thick nickel-plated tape.

The sealer can be charged with any phone charger using a cable with a USB-C connector. The USB-A socket will allow devices with a demand of 5 V and a maximum current of 2 A to be powered.

max. welding current 500 A

input current: 1-1.5 A

output current: 2 A

input voltage: 5V

output voltage: 5V

Operating temperature range: 0~35 ˚C

battery type: Li-Po

battery voltage: 4.2 V

battery capacity: 6300 mAh

dimensions: 148x86x30 mm

display type: LCD

weight: 0.32 kg

kit contents:

welding cable 2 pcs

welding pin 4 pcs

charging cableIndex: YT-82507

Barcode: 5906083101953

Unit of measure: PCE

Volume: 1.94

Weight: 0.717

Max. welding current: 500 A

Storage temperature: 0~50 ˚C

Display type: LCD

Battery type: Li-Po

Weight: 0.32 kg

Battery energy: 26.46 Wh

Set includes: kabel spawalniczy x2|pin spawalniczy x4|kabel ładujący

Dimensions: 148x86x30 mm

Output current: 2 A

Battery capacity: 6300 mAh

Working temperature range: 0~35 ˚C

Input voltage: 5 V d.c.

Input current: 1-1.5 A

Application: do zgrzewania punktowego taśm niklowych i ogniw litowych

Output voltage: 5 V d.c.

Battery voltage: 4.2 V d.c.