PLANETARY MIXER W. BLENDER, 1000W 67810 LUND

Planetary mixer with glass blender:

planetary blender with 1000 watts (1500 watts max)

planetary blender with glass blender./li>

glass blender with a capacity of 1.5 liters./li>

4.5 liter stainless steel bowl

splash guard for bowl

illuminated dial

3 mixing ends: mixer for mixing and kneading masses special hook mixer for kneading yeast or bread dough whisk for whipping egg whites or sponge dough

6 speeds

"Turbo "speed

safety switch

safety switch./li>

stable base with suction cups

operating instructions in Polish

Planetary mixer 67810 meets the requirements for productsów in contact with food in accordance:

1935/2004 – Regulation (EC) on materialsów and productsów intended to come into contact with food

10/2011 – Regulation (EC) on materialsós and articlesós intended to come into contact with food

Dimensions of mixer (without blender): 27 x 32 x 30cm (length x width x height)

The planetary mixer is used for food preparation. Thanks to the rich equipment, it is possible to prepare a wide variety of dishes. Stable base with suction cups and versatility makes the mixer will be helpful in any household Mounting and removing the mixerPlace the mixer on a level and stable surface. Make sure that all the suction cups in the base have gripped the ground. Press the lever in the direction of the arrow, which will release the latch of the working head and cause it to lift. The head will raise itself with the help of a spring, but you should lift it all the way by hand and make sure that the blender's upper head lock has worked. It is not possible to lower the head without pressing the lever again. Install the bowl in the opening of the base. Insert the tabs in the base of the bowl into the recesses around the perimeter of the base opening, and then rotate the bowl according to the direction indicated by the arrow in the base. This will cause the bowl to lock into the base of the mixer. Check the correct installation; if the bowl is fixed evenly and cannot be lifted, this indicates correct installationAround the handle of the mixer tip, install the bowl cover. Place the cover under the head so that the arrow visible on the cover points to the open padlock symbol on the mixer head (VI). Make sure the lid fits evenly over the head and rotate it so that the arrow points to the closed padlock symbolInstall the appropriate tip on the end of the spindle. The spindle tabs must coincide with the indentations around the tip opening. Push the tip up and rotate it toward the closed padlock symbol shown on the top of the tip flangePress the lever and lower the mixer head, the device is ready for use Perform disassembly in reverse order to the assembly procedure Mounting and dismantling the blenderPlace the blender on a level and stable surface. Make sure that all the suction cups in the base have gripped the ground. Make sure the head is locked in the lower position. Remove the blender socket cover by pressing lightly and holding at the point marked with a triangle, then pull the cover outward from the blender housing. Place the blender pitcher on the mounting socket, and after finding a position where the base of the pitcher is flush with the mounting socket. Turn the pitcher in the direction of the arrow labeled "CLOSE". This will allow the jug to lock into the mounting socket. To make sure that the installation has gone correctly, check that the jug fits flush against the mixer housing and cannot be liftedSince there are four possible positions in which the blender jug can be mounted, be guided by the position of the jug handle. Choose them so that you do not have to reach behind the device when grasping the jug handleThe pitcher has a lid with a gasket and an opening with a separate stopper. Push the lid on and check that it fits evenly around the edge of the jug. The lid has a rounded tab, the shape of which has been adjusted to cover the spout of the pitcher. This will prevent the contents of the blender from spilling out during operationThe stopper should be inserted so that the tabs on its perimeter hit the notches in the opening of the lid, and then turned clockwise Removal of the plug should be carried out in the reverse orderThe stopper allows you to refill the contents of the blender without interrupting its operation, minimizing spillage of the contents of the jug. The stopper can also be used as a small kitchen measuring cupCAUTION! - With the blender installed, do not lift the blender head. The weight of the jug may cause the whole device to tip over, spill the contents of the jug, break it, and increase the risk of injury- Since the appliance also runs the blender when in use, the blender bowl and its cover should be installed before the blender is assembled. It is not necessary to install the tip. This will shield the blender spindle when using the blender and reduce the risk of injury to the rotating spindle Disassembly of the blender pitcher should be done in reverse order to the assembly procedure Using the deviceThe device has an on/off switch that allows you to set several speeds and a turbo gear. By setting the switch to the desired position, the speed of the mixer and blender is determined. The turbo position allows you to use the maximum speed. To use it, turn the switch on the device and hold it in the position labeled "Turbo." When you release the pressure, the switch will automatically return to the "0" position, and the device will turn off the speed of the motor. The positions described 0-6 do not need to hold the switchNOTE: Before connecting the plug, make sure that the switch of the device is in position "0" - off. When the plug of the power cord is connected to the power outlet, at the setting "0", the indicator light around the switch shines with a flashing light. Any other setting in the range of 1-6 and "Turbo" causes the indicator light to glow with a steady light With interchangeable tips, the mixer can be used to mix a variety of foodsDough mixer is used for mixing ingredients for medium density masses (such as yeast dough), it is recommended to use the switch setting in the range of 1 - 2 when working with this tipWhisking mixer is used for mixing ingredients for masses of low density (e.g., sponge cake batter, pancake batter), it is recommended to use switch settings in the range of 1 - 4 when using this tipScrambling mixer is used for whipping foam and whipped cream, it is recommended to use the switch settings in the range of 5 - 6 when working with this tip It is recommended to gradually increase the speed of the tip, this will avoid excessive splashing of mixed ingredients. The bowl lid has an opening so that you can add more ingredients without lifting the mixer headDo not exceed the maximum operating time of the device: 6 minutes. Longer running time may lead to overheating and irreparable damage to the device The device has safety switches that do not allow the device to start with the head raised, with the blender or blender socket cover incorrectly installed. This minimizes the risk of user contact with moving parts of the device. However, it should be taken into account that after the motor is turned off, moving parts may continue to whirl for some timeDo not exceed the maximum capacity of the bowl and jug, and take into account that the ingredients may increase in volume during mixing with air. It is recommended to prepare several smaller portions, instead of one large oneCAUTION: When using the blender, avoid contact of any part of the body with the blades. Contact of any objects with the blades is also prohibited. This can lead to serious injuriesWhen using the blender, pour the ingredients into the pitcher through the opening in the lid, this will minimize spilling of the contents of the pitcher. It is recommended not to exceed a volume of 1.2 liters, which will avoid excessive spillage of the contents of the pitcherFor large ingredients, divide them into smaller portions, and if this is not possible, put them in the jug before starting the machine, then install the lid and only start the machine. Do not remove the jug lid while the blender is runningThe blender should not be used to crush ice or frozen food. It is not recommended to use the blender for more than 3 minutesThe temperature of the ingredients placed in the pitcher must not be higher than 80 degrees C The product is supplied complete, but requires assembly before use. Along with the blender are supplied a bowl with lid, three blender tips, blender pitcher with lid.Index: 67810

Barcode: 5906083678103

Unit of measure: KPL

Volume: 50.4

Weight: 7.9

Voltage: 230 V a.c.

Max. power: 1500 W

Jug material: szkło

Product ready for operation as a blender external dimensions: 375x225x540 mm

Working mode: dorywcza S2 (KB) 6 min

Jug capacity: 1.5 l

Bowl material: stal nierdzewna

Weight: 4 kg

Bowl capacity: 4.5 l

Product ready for operation as a mixer external dimensions: 375x225x315 mm

Set includes: mikser|misa|dzbanek z pokrywką|osłona przeciwbryzgowa|mieszadło do mieszania i wyrabiania mas|mieszadło hakowe do zagniatania ciasta drożdżowego lub chlebowego|trzepaczka do ubijania białek

Speed level quantity: 6|turbo

Power: 1000 W

Electric insulation class: II

Digital control panel: nie

Casing material: ABS

Frequency: 50 Hz

Functions: ugniatanie ciasta|ubijanie|mieszanie|blendowanie