SOLDERING IRON 40W /LUND/ 79382 LUND

Resistance soldering iron 40w Lund brand flask soldering iron in a traditional housing with a resistance heater powered directly from the wall outlet. The simplicity of the design makes the device almost failure-free, and with proper care of the soldering iron tip will serve for many years. The power of the heater is enough to properly solder two copper wires or basic electronics in through-hole assembly technology. Ventilation holes in the metal housing of the heater limit the heating of the handle. power supply: 230V power of the heater: 40W depth of the arrowhead hole: about 50 mm max diameter of the arrowhead: 5,2 mm Dimensions of the arrowhead attached to the soldering iron: length: about 80 mm diameter: 4,7 mm diameter of the tip of the arrowhead: 1.0 mm Other dimensions: total length with bent cable: 265 mm length of handle: about 120 mm length of power cord: 140 cm The soldering iron needs 3 to 4 minutes to heat up to 350°C. How to take care of the tip The tips of Lund flask soldering irons are coated with a material that reduces the oxidation of the tip. Prolonged heating and mechanical damage gradually degrade the protective layer, then the tip quickly oxidizes resulting in problems with melting the solder joint. Instead of melting and sticking to the soldering tip, the tin peens and falls off. A proven way to take care of the tip is to tin it. When first warming up the soldering iron, apply a bit of tin to the tip of the spearhead and remove the excess, for example, with brass shavings. The resulting layer of tin protects against oxidation. It is good practice to tin the tip every time you finish a job. Note Cob soldering irons powered directly from a wall outlet should have a plug with a grounding pin and should be powered from a grounded outlet. Failure to ground the metal housing of the heater is a risk of electrocution, which at best will end in burns. All Lund brand flask soldering irons have a grounded plug that is connected to the metal housing of the heater.Index: 79382

Barcode: 5906083793820

Unit of measure: PCE

Volume: 1.174

Weight: 0.28

Voltage: 230 V a.c.

Soldering tip dimensions: Ø5x70 mm

Weight: 0.22 kg

Power: 40 W

Electric insulation class: I

Frequency: 50 Hz

Max. temperature of soldering tip: 400 ˚C

Heating time: 5-10 min