|
Veikals / Noliktava
|
30. oktobris | Bez maksas |
|
|||
|
Ar kurjeru visā Latvijā
|
31. oktobris | No 3,99 EUR |
|
|||
|
Piegādes punktos
|
31. oktobris | No 1,99 EUR |
Electric impact wrench 3/4".
power 1100W
800 Nm
complete with sockets 24 mm, 30 mm, 32 mm, 36 mm.
length of power cord 4 meters
the whole is housed in a handy case
The impact wrench is an ordinary power tool, class II insulation, designed for loosening and tightening nuts and bolts. Thanks to the electric power supply, it is not required to have a pneumatic system to operate the wrench. Correct, reliable and safe operation of the tool depends on proper operation. The wrench is supplied complete and does not require assembly. Socket wrenches are supplied with the wrench.
before screwing a bolt or nut with a socket wrench, manually thread the bolt or nut (at least two turns)
ensure that you have correctly sized the socket wrench in relation to the component to be unscrewed or tightened. Incorrect sizing can result in damage to both the wrench and the nut or bolt
slip the socket wrench over the nut or bolt head
press the switch and hold it in the position corresponding to the desired direction of rotation
in the case of tightening, press and hold the switch in the F position, and in the case of loosening in the R position
in the case of tightening, when the maximum torque is reached, the overload clutch will engage and the drive of the driver will be disconnected. You should then let go of the switch and wait until the motor stops rotating completely
in the case of loosening, check that the torque with which the nut was tightened does not exceed the maximum torque of the wrench. If this is the case, the overload clutch will also engage and it may not be possible to unscrew the nut
after unscrewing, release pressure on the device switch and wait until the motor stops rotating completely
after finishing work, unplug the tool from the power supply and proceed with maintenance
Set contents:
Electric impact wrench Sthor
impact sockets 24 mm, 30 mm, 32 mm, 36 mm
length of the tool.
length of power cord 4 meters
practical carrying case
.Index: 57097
Barcode: 5906083025884
Unit of measure: KPL
Volume: 17.973
Weight: 7.75
Voltage: 230-240 V a.c.
Wire length: 4 m
Max. torque: 800 Nm
Acoustic pressure: 89.0 ± 3.0 dB(A)
Vibrations: 10.04 ± 1.5 m/s²
Weight: 4.1 kg
Set includes: klucz udarowy|nasadka udarowa x4 (24 mm, 30 mm, 32 mm, 36 mm)
Protection grade: IP20
Power: 1100 W
Electric insulation class: II
Impact frequency: 4000 min⁻¹
Toolholder type: zabierak
Frequency: 50 Hz
Acoustic power: 100.0 ± 3.0 dB(A)
Rotations: 2200 min⁻¹
Toolholder size: 3/4" (19.0 mm)